Brief Introduction:

DB-IVC Stainless Steel Electro-Thermal Hot Plate is widely used for curing and drying and temperature experiments, DB-IVC Stainless Steel Electro-Thermal Hot Plate is also one of the necessary tools for biology, inheritance, medicine, environmental protection, science and research, etc. The following is the main characteristics of our product:

1. Produced by the adoption of special technique, no deformation of this product occurs in hyperthermia state.

2. Made of stainless steel, working plate of this product possesses the character of strong anti-corrosion.

3. Operated safely and simply, the temperature of this product can be raised quickly and distributed well.

Qualification:

1.Power: 220V±10V, 50Hz-60Hz

2. Temp Range: RT-299℃

Type: DB-ⅣC

Heat Power: 2000W

Size (mm): 300x400

Usage and Maintenance:

1. To clean the working surface, ensure that there is no water drop, wastes, cruband other residue remained.

2. Set the test bottle and other apparatus.

3. Power the switch and the electrothermal plate will be on the operation with the shining of indicator light.

4. On operation, the electrothermal plate should be attended by special personal.

5. Before closing, turn off all switches to cut off power.

6. After the working surface has been cooled, do according to Ⅲ.1

Temperature setting:

Set temperature: press SET key to set temperature. After pressing SET key, data on lower line digital tube will flash (the upper low measure temperature normally), which means meter enters the status of temperature setting. Press △ key to increase set value, and press ▽ key to decrease set value. If continuously press increase key or decrease key, set value