Your location:Home   Products    Electric and Magnetic Stirrer    HJ-6 Multi-unit Magnetic Stirrer
0
Shopping Cart
Delete all items
Proceed to send inquiry
*
*
*
HJ-6 Multi-unit Magnetic Stirrer
HJ-6 Multi-unit Magnetic Stirrer is one of six-bar magnetic stirrers. HJ-6 Multi-unit Magnetic Stirrer is an ideal analytically detector for liquid heating and stirring, it possesses many advantages, such as lower noise, less mechanical breakdown and stable timing.
WHAT ARE YOU LOOKING FOR?
*
This field is required
Total quantity you need
*
This field is required
*
This field is required
Email format error
Due to email instability, you might miss our correspondence. Please provide your phone number for alternative contact.
This field is required
Telephone information is wrong!
Send Message
//www.jsjinyi.com/uploadfiles/128.1.164.122/webid258/source_water/202302/167660262311.jpg
Product Detail

Introduction:


HJ-6 Multi-unit Magnetic Stirrer is one of six-bar magnetic stirrers. HJ-6 Multi-unit Magnetic Stirrer is an ideal analytically detector for liquid heating and stirring, it possesses many advantages, such as lower noise, less mechanical breakdown and stable timing. The stirrer bar is made of teflon and high-quality alnico, so it is heat-resistant, abrasive resistant, anti-corrosive with high speed stirring. It is also efficient to mix and stir the liquid in the airtight vessel.


Technical Index:


1. Power adapter: 220v±10% 50HZ-60HZ

2. Max vessel capacity: (20~200ml) ×6

3. Power of motor: 25W×6

4. Heating power: 200W×6

5. Speed range: 0-1800rpm

6. Timing range: 0~120min


Methods of Usage:


1. Turn on the switch of the power, the pilot lamp is light. Rotate the potential governor clockwise to make the rotation speed of stirring from slow to fast. Stop rotating if the speed is enough as required.

2. If the stirrer bar jumping in the operation, switch off the power and then switch on again. Adjust the speed from slow to fast, then it will be in gear.

3. If need timing, just adjust to the needed time. If not, please turn the knob to "ON". Timer is used to control the motor speed, not the power.


Cautions:


1. To assure your safety, please use three phase electrical outlet and make it grounded in use.

2. If the stirring liquid splashed on the disk, please switch off the power immediately. Otherwise the motor and elements will be damaged.

3. Keep the instrument neat after use. Switch off the power if not using for long time and turn off the switch to avoid accident.

Related products
Related news
Inquire Now
Name: *
Mobile:
E-mail: *
Message: *
Verification code: *
  
Related products
Other products
Hot products