Jiangsu Jinyi Instrument Technology Co.,Ltd

Introduction:

GZ-A High Power Electric Stirrer employs friction wheel drive system to make stepless speed regulation. Motor has a regular operation point at which output power and moment of are optimum and almost remain constant. Power is transmitted from friction wheel and centre shaft mounted on two plastic couplings. Two step manual regulated speed is realized by dual gear train installed on two identical shaft. Power of stirring shaft is the same with that of motor without considering loss effect during transmission. The two spiral couplings on the centre shaft can keep the loss very low. Couplings could automatically regulate the pressure friction wheel needed according to load on the stirring shaft, low pressure if low load, high pressure if high load.

Specifications:

☉ Output power: 200W

☉ Rated power supply: 220V/110V 50Hz/60Hz

☉ Operation condition: continuous operation

☉ Speed regulation range: 60-500rpm (stepⅠ), Digital Display

240-2000rpm (stepⅡ), Digital Display

☉ Maximum moment of stirring shaft: 1850gcm

☉ Max capacity: 20L (water)

☉ Ambient temperature: 5-40℃

☉ Clamping range: 0.5-10mm

☉ Applicable medium viscosity: 0-10000mpas