Usage and characteristics

JJ-4 six-link in-phase electric stirrer is improved according to domestic and foreign similar products. JJ-4 SIX-LINK IN-PHASE ELECTRIC STIRRER has six stirring heads and was driven by pulley. They can work at the same time, which can save time, and improve the working efficiency. About the electric machinery, advanced permanent magnetism direct current motor is selected, and energizing and timing line is matched, so it is of low rotary speed, big torsion, stable rotary, no noise adjustable speed and continuously used etc. The muddler is made of stainless steel, resistant to corrosion. The lift type of worktable can be adjusted, it is very convenient to operate. It also has characteristics of timing, illumination and digital speed etc. The instruments are extensively used in some collages, environment protection, Hygiene and control, medicine, metallurgy, chemistry, and food.

Main technical index

☉Power: 220V 50Hz

☉Timing scope: 0-999 minutes or open often

☉Rotary speed of stirring: 0-2000 rotates/minute (digital, speed variation)

☉Power of electric machinery: 200W

☉Working method: continuous (with illustration)

Using methods

While using the instrument, first keep the stirring vessel flat on the worktable, the loose the orient but to adjust the height of worktable to suit place, tight it keep the switch to "ON", Turn the timing knob on, then the instrument starts running, Rotate the knob for speed control to adjust the rotary speed of the muddler (the speed will increase while clockwise, decease while anticlockwise). Rotate the timing knob to relative scale if needing timing, If not, keep the knob to "ON", Keep the knob of illustration to "ON" TO TURN ON THE LIGHT.

Precautions

☉Use three-eve outlet and grounded while using to ensure your personal safety.

☉The stirring speed should be adjusted form low to high till to required speed.

☉Keep the instrument clean. Do not let the solution into the instrument, which will effect the using life.