Brief introduction

SHA-B Thermostatic Shaking Water Bath is manufactured with advanced technical. Each index of performance can meet national standard requirements, It is in possession of many merits, such as high precision of controlling temperature, steady oscillation, reliable quality, long service life and so on. SHA-B Thermostatic Shaking Water Bath is adopted advanced stainless spring multipurpose ones, used conveniently and extensively in culture of microorganism and also scientific research and experiments of food, life-form, medicine, agriculture, and environment protection.

Technical index

1. Power: AC 220V 50Hz

2. Range of temperature controlled: RT-100 ℃

3. Temperature showing: LED 4 digital showing precision ≤±0.3℃

4. Speed: 0-300 rpm precision ≤±1 rpm

The machine with dual function of Convoluting & Reciprocating

5. Size of working-room: ≥720mm×480mm×520mm

6. Load: ≥20Kg

7. Timing: 0-120 minutes

8. Oscillation amplitude: 20mm

Method of application

Set temperature: press SET key to set temperature. After pressing SET key, data on lower line digital tube will flash (the upper low measure temperature normally), which means meter enters the status of temperature setting. Press △ key to increase set value, and press ▽ key to decrease set value. If continuously press increase key or decrease key, set value will change rapidly. Press SET key again, and meter returns to temperature under normal working status. Setting is finished.

Correction of sensor error: When confirming that displayed value on meter is not correct, correct displayed value. Press SET key for 3 seconds to enter internal menu of meter, and press △ or ▽ key to correct this parameter after selecting parameter SC. Correction range of sensor error is +50~-50. After finishing correction, press SET key again for 3 seconds to exit. Correction value of meter when ex-work is 0. When using, one shall preventing correct meter from being corrected incorrect.

Precautions

1. If timing is needed, adjust the knob to relevant place. If no adjust it to "ON".

2. While taking out or put into vessel, the instrument should be turned off.

3. The instrument should be placed steadily. Don't use it incline.

4. In order to assure the safety of your body and property, the outlet must be turned off after finishing working.

The products in our factory are assured to be maintained all the time. Please use them at your ease. (Cost of production will be paid extenuatory when using improperly or impairing artificially)